
1-Micron Oil Filtration
Filtamax ByPass filter



why standard filtration falls short




Limited filtration
Standard full-flow filters typically capture particles only down to 10-25 microns
Fine Particle wear
Smaller contaminants can continue circulating through critical components
Independent testing found wear rates up to 8x lower when oil was filtered to 5 microns
accelerated engine wear
shorted oil life
Water and carbon buildup can reduce oil quality and service life
Filtamax provides continuous 1-micron filtration as part of proactive oil-maintenance strategy.
The Filtamax Process
01
install alongside the existing filter
Filtamax operates as a bypass filter in parallel with the full-flow system. No engine modification is required, and the main oil circuit remains uninterrupted.
02
continuously polish oil to 1 micron
During operation, a portion of the oil is continuously routed through Filtamax, removing contaminants down to 1 micron - 10 to 25x finer than a standard full-flow filter.
03
achieve cleaner oil, extend intervals.
Oil cleanliness improves from ISO code 23/21. to 8/0 - four ISO grades cleaner than new oil - when engine wear can be reduced by up to 8x.
Contaminants
It filters contaminants down to 1 micron, compared to 10-25 microns for standard full-flow filters

Oil Replacement
On client application: oil drain intervals increased from 1,500 to more than 6,000 operating hours.

BENEFITS
Water Content
It removes 99.9% water content and carbon buildup from oil.

Oil Quality
Oil quality improved from ISO 23/31 to 8/0 after four hours of filtration - four ISO grades cleaner than new oil.

Engine Life
It extends engine life by up to 5x and hydraulic-system life by up to 50x.






